BDYGT - PHOTO PRODUCTS HARDENER
- MSDS: BDYGT
- Manufacturer: E I DU PONT DE NEMOURS AND CO (INC )
- Product Name: PHOTO PRODUCTS HARDENER
- National Stock Number: 6750-00-411-5955
Product Identification
Product ID:PHOTO PRODUCTS HARDENER
MSDS Date:01/01/1985
FSC:6750
NIIN:00-411-5955
MSDS Number: BDYGT
Responsible Party
WILMINGTON, DE 19899
US
Emergency Phone: 800-441-7515
Info Phone: 800-441-7515
Cage: 18773
Contractor
Telephone: 800-441-7515;800-441-9442
Cage: 18873
Ingredients
ACETIC ACID (SARA III)
CAS: 64-19-7
RTECS: AF1225000
Fraction By Weight: 10.0%
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM/15 STEL; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ALUMINUM CHLORIDE
CAS: 7446-70-0
RTECS: BD0525000
Fraction By Weight: 76.0%
OSHA PEL 2 MG/M3 (AS AL)
ACGIH TLV: 2 MG/M3 (AS AL);8990
Hazards
Effects of Overexposure:CAUSES EYE BURNS & SKIN IRRITATION
First Aid
First Aid:FOR AN EYE CONTACT FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES.CALL A PHYSICIAN.WASH CLOTHING BEFORE REUSE.DISCARD
CONTAMINATED SHOES.FLUSH SKIN WITH WATER.
Fire Fighting
Flash Point:NOT SPECIFIED
Lower Limits:UNKN
Upper Limits:UNKN
Extinguishing Media:NOT A FIRE HAZARD
Fire Fighting Procedures:NOT SPECIFIED
Unusual Fire/Explosion Hazard:NOT SPECIFIED
Accidental Release
Spill Release Procedures:FLUSH TO CHEMICAL SEWER WITH WATER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED.DO NOT GET IN
EYES,SKIN OR CLOTHING.
Other Precautions:AVOID BREATHING MIST.USE WITH ADEQUATE
VENTILATION.WASH THOROUGHLY AFTER HANDLING.
Exposure Controls
Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:NO SPECIFIED
Supplemental Safety and Health
MSDS NOT DTD & SIGNED. PART A & B HAS SAME NSN.KEY1:N1
Chemical Properties
HCC:C2
Vapor Pres:UNK
Vapor Density:UNKN
Spec Gravity:1.22
Appearance and Odor:NOT SPECIFIED
Percent Volatiles by Volume:UNKN
Stability
Stability Indicator/Materials to Avoid:YES
NOT SPECIFIED
Stability Condition to Avoid:NOT SPECIFIED
Hazardous Decomposition Products:NOT SPECIFIED
Disposal
Waste Disposal Methods:FLUSH TO CHEMICAL OR INDUSTRIAL PROCESS
SEWER.FOR LARGE VOLUMES,ACETIC ACID VAPORS CAN BE REDUCED BY
NEUTRALIZING WITH ALKALI
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.